Use of polyurethane parts in the automotive suspension

Technological progress has not bypassed the most popular means of transport – car. With advanced technologies the car becomes more complex. Suspension of the car has undergone a lot of changes since the invention of the wheel. Many different kinds of automotive suspension components are developed, the electronic control of the suspension is in use, and all this for the implementation of trivial tasks of suspension – ensuring smooth driving and safety. Continue reading “Use of polyurethane parts in the automotive suspension”

Removal and installation of the bushings set 1-20-172 for the steering rack.

Attention! Before starting a work of the removing and installing of the bushings, choose the metal tubings (hub base and hub driver) for the removal and installation for each bushing. Hub base I.D. should be 1-2 mm. bigger than O.D. of the bushing’s flange (fig.3) not to interfere removing of the bushing. O.D. of the hub driver must be the same as O.D. of the inner metal sleeve.While removing, note the positions of big bushing and detents of the bushings. Mark the steering rack for the further correct installation.
Continue reading “Removal and installation of the bushings set 1-20-172 for the steering rack.”

Removal and installation of the stabilizer bushing 1-06-135

Removal

 Attention! Original stabilizer bushing has the outer metal shell. Choose the metal tubings (hub base and hub driver) for the removal and installation. O.D. of the hub driver must be 0,5 mm. less than O.D. of the outer metal shell to avoid damage of the housing bore. I.D. of the hub base must be 1-2 mm. bigger than O.D. of the outer metal shell not to interfere the removing of bushing. Continue reading “Removal and installation of the stabilizer bushing 1-06-135”

Removal and Installation of the Steering Rack Bushings 1-20-975/1188/1195/1292/2010/3000

Attention! Before starting works on dismantling and installing the bushings, note the location of the bushings in the steering rack. Bushings (1-20-975/1188/1195/1292/2010/3000) are different to original, manufactured without outer metal shell and are installed into steering rack without the usage of old bushing’s outer metal shell.
Continue reading “Removal and Installation of the Steering Rack Bushings 1-20-975/1188/1195/1292/2010/3000”

Removal and Installation of the Bushing 14-06-2311

Attention! The original bushing has a diametrical displacement between the metal components. The bushing is directed toward the mount of the bracket by smaller size offset. The location of bushing in the bracket is significant for the proper operation of the suspension. The worn out parts has not clearly offset, so you should mark the bushing to indicate the correct placement of the bushings in the bracket.
Continue reading “Removal and Installation of the Bushing 14-06-2311”